Raynor Garage Door Prices (2026): Costs, Collections and Warranty

How much does a Raynor garage door cost? Raynor doesn’t publish a price list: its authorized dealers set the price for each job. As a guide, HomeAdvisor gives an average cost range for Raynor of $600 to $4,000, and a typical installed double (16×7) steel door from a major brand costs $1,200 to $4,000, depending on insulation and style. Wood, aluminum and premium designs cost more.

Raynor has made garage doors since 1944 and is based in Dixon, Illinois. It sells through a network of authorized dealers in the US and abroad. This page pulls together what Raynor publishes about its doors and what comparable doors cost installed, so you can tell whether a quote is fair.

Get free quotes for a Raynor garage door

Enter your ZIP code to compare prices from local pros who supply and install new garage doors. It's free and takes about two minutes.

Free, with no obligation to hire.

Raynor garage door prices

Because Raynor leaves pricing to its dealers, the best guide is what comparable doors cost installed. These are our national ranges for a standard double (16×7) door, including the door, hardware, labor and removal of the old door:

Door type (16×7, installed)Typical cost
Basic steel, non-insulated$1,200 – $2,200
Insulated steel$1,700 – $4,000
Steel carriage house or wood-look$2,000 – $5,000
Aluminum and glass$2,500 – $6,000+
Real wood$3,500 – $8,000+

A single-car door (8×7 or 9×7) usually costs $750 to $2,000 installed. HomeAdvisor’s average cost range for Raynor is $600 to $4,000, but it doesn’t say whether that includes installation, so treat it as a rough guide.

Prices vary by region, and quotes can differ a lot for the same door, so it pays to get more than one. Our garage door cost guide explains what drives the price, and its cost calculator gives you a ballpark for your own door.

Raynor door collections

Raynor’s residential collections include:

  • Aspen and Encore: insulated steel doors (polyurethane and polystyrene).
  • BuildMark, TradeMark, Country Manor and RockCreeke: other steel collections.
  • StyleView: aluminum-and-glass doors.
  • Revival Wood and Eden Coast: wood-overlay designs.

As with other brands, plain steel doors usually cost least, wood-overlay doors more, and aluminum-and-glass the most. Not sure which material suits your house? Our garage door materials comparison lines them up side by side.

Raynor insulation options

Raynor offers polyurethane and polystyrene insulation. The Aspen AP138 uses polyurethane and is rated R-13.0, and the Encore EN200 uses polystyrene and is rated R-10.0. Ask your dealer for the R-value of the exact door you’re quoted. For an attached garage or a room above the garage, an insulated door is usually worth the extra few hundred dollars. Our garage door insulation guide explains R-values in plain English.

Wind-rated Raynor doors

Raynor publishes wind-load approvals by model. For example, the Aspen AP138 is approved under the Florida Building Code and the Texas Department of Insurance, but not for Florida’s High-Velocity Hurricane Zone, while the Encore EN200 is approved for all three. Ask your dealer which approval your county requires and check the label on the door after installation. Our hurricane garage doors guide explains what the ratings mean.

Raynor warranty

Raynor’s residential warranty covers models such as Aspen and Encore. For single-family homes it lists:

PartWarranty
SectionsLifetime
Hardware (EnduraCote)Lifetime
Hardware (galvanized)6 years
Springs3 years
Windows3 years
Climate seal1 year

The warranty covers the original residential purchaser, with shorter terms for rentals and condo associations. Ask your dealer for the warranty on the exact model you’re quoted, plus their own labor warranty, in writing.

Where to buy a Raynor door

Raynor sells through authorized Raynor dealers, which you can find through the dealer locator on its website. When you compare quotes, check that each one has the same collection, size, insulation and R-value, and says whether new springs, tracks and haul-away of the old door are included.

Raynor vs other brands

The other big names you’ll see in quotes are Clopay, Amarr, Wayne Dalton, C.H.I., Overhead Door, Haas and Hörmann. Use our garage door brand comparison to put Raynor side by side with up to three other brands.

Get Raynor quotes

Tell us about your garage and we’ll connect you with pre-screened local pros who supply and install new doors. It’s free, and there’s no obligation.

Get free quotes for a Raynor garage door

Enter your ZIP code to compare prices from local pros who supply and install new garage doors. It's free and takes about two minutes.

Free, with no obligation to hire.

Frequently asked questions

How much does a Raynor garage door cost?

Raynor doesn’t publish prices. HomeAdvisor’s average cost range for the brand is $600 to $4,000, and a typical installed double steel door from a major brand runs $1,200 to $4,000.

Where are Raynor garage doors made?

Raynor is based in Dixon, Illinois, and has made garage doors since 1944.

Are Raynor doors approved for hurricane zones?

Some are. Raynor lists approvals by model: the Encore EN200, for example, is approved for Florida’s High-Velocity Hurricane Zone, while the Aspen AP138 is not. Check the exact model with your dealer.

What is the warranty on a Raynor garage door?

On models such as Aspen and Encore, Raynor lists lifetime coverage on sections for single-family homes, with shorter terms on springs, windows and seals. See the table above.

Sources