Wayne Dalton Garage Door Prices (2026): Costs, Collections and Warranty

wayne-dalton-garage-door-prices-featured

How much does a Wayne Dalton garage door cost? Wayne Dalton doesn’t publish a price list: prices are set by Wayne Dalton’s sales and service centers and dealers for each job. As a guide, HomeAdvisor gives an average cost range for Wayne Dalton of $800 to $10,000, and a typical installed double (16×7) steel door from a major brand costs $1,200 to $4,000, depending on insulation and style. Fiberglass and custom designs cost more.

Wayne Dalton is part of Overhead Door Corporation, the company that also makes Overhead Door garage doors and Genie openers. It sells through its own factory-owned sales and service centers and through dealers. This page pulls together what Wayne Dalton publishes about its doors and what comparable doors cost installed, so you can tell whether a quote is fair.

Get free quotes for a Wayne Dalton garage door

Enter your ZIP code to compare prices from local pros who supply and install new garage doors. It's free and takes about two minutes.

Free, with no obligation to hire.

Wayne Dalton garage door prices

Because Wayne Dalton leaves pricing to its sellers, the best guide is what comparable doors cost installed. These are our national ranges for a standard double (16×7) door, including the door, hardware, labor and removal of the old door:

Door type (16×7, installed)Typical cost
Basic steel, non-insulated$1,200 – $2,200
Insulated steel$1,700 – $4,000
Steel carriage house or wood-look$2,000 – $5,000
Fiberglass$2,000 – $5,000

A single-car door (8×7 or 9×7) usually costs $750 to $2,000 installed. HomeAdvisor’s average cost range for Wayne Dalton is $800 to $10,000, but it doesn’t say whether that includes installation, so treat it as a rough guide.

Prices vary by region, and quotes can differ a lot for the same door, so it pays to get more than one. Our garage door cost guide explains what drives the price, and its cost calculator gives you a ballpark for your own door.

Wayne Dalton door collections

Wayne Dalton’s residential collections include:

  • Classic Steel: traditional steel doors.
  • Designer Steel: steel doors with more style options.
  • Carriage House Steel: steel doors with a carriage-house look.
  • Fiberglass: fiberglass doors, such as the model 8680.

As with other brands, plain steel doors usually cost least, and carriage-house and fiberglass doors more. Not sure which material suits your house? Our garage door materials comparison lines them up side by side.

Wayne Dalton insulation options

Wayne Dalton offers insulated doors. Its Fiberglass 8680, for example, uses polyurethane insulation rated R-11. Ask for the R-value of the exact door you’re quoted. For an attached garage or a room above the garage, an insulated door is usually worth the extra few hundred dollars. Our garage door insulation guide explains R-values in plain English.

Wind-rated Wayne Dalton doors

We couldn’t confirm Wayne Dalton’s wind-load options from its website. If you live in a hurricane or high-wind area, ask for the exact wind-load rating and local approvals before you buy, and check the label on the door after installation. Our hurricane garage doors guide explains what the ratings mean.

Wayne Dalton warranty

Wayne Dalton warranties vary by model. The Fiberglass 8680, for example, carries a limited lifetime warranty.

Ask for the warranty on the exact model you’re quoted, covering the sections, hardware, springs and finish, plus the installer’s labor warranty, in writing.

Where to buy a Wayne Dalton door

Wayne Dalton sells through Wayne Dalton Sales & Service, a factory-owned division with 14 US locations, and through dealers you can find with the locator on its website. When you compare quotes, check that each one has the same collection, size, insulation and R-value, and says whether new springs, tracks and haul-away of the old door are included.

Wayne Dalton vs other brands

The other big names you’ll see in quotes are Clopay, Amarr, C.H.I., Overhead Door, Raynor, Haas and Hörmann. Use our garage door brand comparison to put Wayne Dalton side by side with up to three other brands.

Get Wayne Dalton quotes

Tell us about your garage and we’ll connect you with pre-screened local pros who supply and install new doors. It’s free, and there’s no obligation.

Get free quotes for a Wayne Dalton garage door

Enter your ZIP code to compare prices from local pros who supply and install new garage doors. It's free and takes about two minutes.

Free, with no obligation to hire.

Frequently asked questions

How much does a Wayne Dalton garage door cost?

Wayne Dalton doesn’t publish prices. HomeAdvisor’s average cost range for the brand is $800 to $10,000, and a typical installed double steel door from a major brand runs $1,200 to $4,000.

Who owns Wayne Dalton?

Wayne Dalton is part of Overhead Door Corporation, which is owned by Japan’s Sanwa Holdings. The same group makes Overhead Door garage doors and Genie openers.

Does Wayne Dalton make fiberglass garage doors?

Yes. Its fiberglass collection includes the model 8680, which has polyurethane insulation rated R-11 and a limited lifetime warranty.

Why is HomeAdvisor’s Wayne Dalton range so wide?

HomeAdvisor gives $800 to $10,000 for the brand but doesn’t break it down. A range that wide is likely to take in everything from basic steel to large custom doors, so a quote for a standard double steel door should be much nearer our installed ranges above.

Sources